NSN 5305-01-720-0300 · NIIN 017200300 · FSC 5305
NO DASHES 5305017200300
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F-15EX
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FASTENER NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE 6AL-4V ER NAS621 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RING MFR REF SINGLE MATERIAL RESPONSE ST3-251 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-430 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE-ASSEMBLED O-RING,100 DEG MODIFIED HEAD,DOVETAIL SLOT,TITANIUM |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.6775 AND INCHES MAXIMUM 0.6975 |
| CBBL | FEATURES PROVIDED | DRY FILM LUBRICANT AND CETYL ALCOHOL LUBRICANT |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.469 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.1405 AND INCHES MAXIMUM 1.1875 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.5018 AND INCHES MAXIMUM 0.5066 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.0713 AND INCHES MAXIMUM 0.0733 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| MATT | MATERIAL | FASTENER TITANIUM ALLOY |
| MATT | MATERIAL | RING RUBBER FLUOROSILICONE CLASS FQ |
| AGAV | END ITEM IDENTIFICATION | F-15EX |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |