NSN 3120-00-407-4375 · NIIN 004074375 · FSC 3120
NO DASHES 3120004074375
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.3120 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.9530 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.7710 AND INCHES MAXIMUM 0.7910 |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.9690 AND INCHES MAXIMUM 1.0620 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 4500 |
| FEAT | SPECIAL FEATURES | KEYWAY IN SHANK |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 1.5520 AND INCHES MAXIMUM 1.5720 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.4320 AND INCHES MAXIMUM 0.4370 |
| AAJD | THREAD CLASS | 3A |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2515 |
| CMLP | THREAD QUANTITY PER INCH | 3 |
| CTLM | LUBRICATION FEATURE | INTERNAL OUTER MEMBER GROOVE |
| CBBL | FEATURES PROVIDED | FLUSH LUBRICATION FITTING |
| MATT | MATERIAL | INSIDE DIAMETER SURFACE OF BODY STEEL COMP 4130 |
| MATT | MATERIAL | OUTER LAYER BRONZE AND ALUMINUM |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6868 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.3320 AND INCHES MAXIMUM 0.3420 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP E52100 |
Supersedes
This item replaces cancelled NIINs 008351839 · 009116376. An older drawing citing one of those numbers resolves here.