NSN 3405-01-196-9580 · NIIN 011969580 · FSC 3405
NO DASHES 3405011969580
In Stock
SAW,POWER HACK
Saws and Filing Machines
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ACZB | FREQUENCY RATING | HERTZ NOMINAL 60.0 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | OIL CAN,1; WRENCHES,1 SET; COOLANT SYSTEM,1; SAW BLADE,17.800 IN.,1; MITERING DEVICE,1 |
| AMSE | VOLTAGE RATING | VOLTS MINIMUM 220.0 AND VOLTS MAXIMUM 440.0 |
| AMWL | STROKE LENGTH | INCHES NOMINAL 17.800 |
| ANCY | HORSEPOWER RATING | 3.500 |
| APGF | DESIGN TYPE | HORIZONTAL |
| AQDE | FEED CONTROL TYPE | HYDRAULIC |
| ARCM | DRIVE METHOD | ELECTRIC MOTOR |
| BRKH | MATERIAL SIZE ACCOMMODATED | 11 IN. BY 7.875 IN. |
| BWLS | CUT TYPE FOR WHICH DESIGNED | WET |
| BWMM | STROKE SPEED QUANTITY | 6 |
| BWMQ | SAWING SPEED IN STROKES PER MINUTE | SINGLE MINIMUM 36 AND MAXIMUM 118 |
| BWMS | BLADE CAPACITY | INCHES 11.000 |
| BWMY | VISE TYPE | SCREW SWIVEL |
| FAAZ | PHASE | THREE |
Supersedes
This item replaces cancelled NIIN 012149116. An older drawing citing one of those numbers resolves here.