NSN 6105-00-853-6581 · NIIN 008536581 · FSC 6105
NO DASHES 6105008536581
In Stock
MOTOR,CONTROL
Motors, Electrical
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWDY | TEMP RATING | OPERATING CELSIUS 25.0 |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 36.0 |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 0.28 |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| FEAT | SPECIAL FEATURES | GEAR ON TAKE OFF SHAFT |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| BFMF | COOLING METHOD | NONVENTILATED |
| CWFX | ROTOR SPEED RATING IN RPM | LOW NO LOAD 5800.0 AND HIGH NO LOAD 6800.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.215 |
| FAAZ | PHASE | INPUT TWO |
| AAJT | OVERALL HEIGHT | INCHES 0.946 |
| AAJU | OVERALL LENGTH | INCHES 1.304 |
| AAJV | OVERALL WIDTH | INCHES 0.946 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1250 |
| ACDC | CURRENT TYPE | INPUT AC |
| AJLA | TEETH QUANTITY | 13 |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 80000.0 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 250.0 AND 200.0 |
| BFML | CONTROL FIELD WINDING TYPE | TWO WINDINGS, SERIES CONNECTED OR TWO WINDINGS, PARALLEL CONNECTED |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 0.700 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A23 |
Supersedes
This item replaces cancelled NIIN 009170495. An older drawing citing one of those numbers resolves here.