NSN 4720-00-812-5467 · NIIN 008125467 · FSC 4720
NO DASHES 4720008125467
In Stock
HOSE ASSEMBLY,METALLIC
Hose and Flexible Tubing
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.812 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.227 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 2.125 |
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.375 |
| AHNC | CONNECTION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.188 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.812 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 9.000 |
| ADJL | INNER CONVEYING TUBE STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.266 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.020 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| FEAT | SPECIAL FEATURES | INSIDE DIAMETER/FLOW/ OF FLANGE IS 1.500 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.875 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 120.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 15.115 |
| CTCJ | FLANGE STYLE | |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 60.0 |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.460 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 2.375 |
| AECS | BOLT HOLE QUANTITY | 4 |