NSN 3020-00-554-7785 · NIIN 005547785 · FSC 3020
NO DASHES 3020005547785
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.849 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 16.0 AND ROCKWELL C MAXIMUM 25.0 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.343 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.250 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.781 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | AXIALLY THROUGH BODY FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CWTG | COUNTERBORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.375 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.625 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.156 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.531 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-16232 |
| STYL | STYLE DESIGNATOR | |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.061 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 2.248 |
| CWXG | SECOND STEP NOMINAL LENGTH | FIRST END INCHES 0.125 |
| CWXL | SECOND STEP NOMINAL DIAMETER | FIRST END INCHES 2.625 |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | AXIALLY THROUGH BODY FIRST END INCHES 1.968 |
| MATT | MATERIAL | OVERALL STEEL COMP 8637H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66,AISI TO SAE 8637H |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH BODY FIRST END THREADED 3 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.8000 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | AXIALLY THROUGH BODY FIRST END INCHES 0.164 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AJLA | TEETH QUANTITY | 112 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.187 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.250 |
| CWTB | COUNTERBORE NOMINAL DEPTH | BOTH ENDS INCHES 0.281 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 16.0 AND ROCKWELL C MAXIMUM 25.0 |