NSN 3110-00-950-8071 · NIIN 009508071 · FSC 3110
NO DASHES 3110009508071
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| AGYK | SHIELD QUANTITY | 2 |
| MATT | MATERIAL | SHIELD STEEL CORROSION RESISTING |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.2220 AND INCHES MAXIMUM 0.2260 |
| MATT | MATERIAL | RETAINER STEEL CORROSION RESISTING |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| CTLH | OUTER RING TAPER | PER FOOT IN INCHES NOMINAL 0.0800 |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| AGZC | LOAD DIRECTION | RADIAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| STYL | STYLE DESIGNATOR | |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2510 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.3125 AND INCHES MAXIMUM 0.3127 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| AGZD | BORE SHAPE | STRAIGHT |
| AGYC | CALIBRATION DESIGNATOR | C |
| AGYE | SURFACE FINISH | GROUND |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0002 AND INCHES MAXIMUM RADIAL 0.0005 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0400 AND INCHES MAXIMUM 0.0440 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.7480 AND INCHES MAXIMUM 0.7550 |