NSN 5306-00-494-2619 · NIIN 004942619 · FSC 5306
NO DASHES 5306004942619
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.506 AND INCHES MAXIMUM 0.556 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.254 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.304 AND INCHES MAXIMUM 0.313 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.465 AND INCHES MAXIMUM 0.475 |
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.042 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.037 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 51.0 AND ROCKWELL C MAXIMUM 54.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CRHC | HOLE CONFIGURATION STYLE | |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ASXK | HOLE QUANTITY | 4 |
| AAJD | THREAD CLASS | 3A |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.802 AND INCHES MAXIMUM 0.822 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6485 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-8837,TY 1,CL 2 |
Supersedes
This item replaces cancelled NIIN 000324017. An older drawing citing one of those numbers resolves here.