NSN 5910-00-766-9165 · NIIN 007669165 · FSC 5910
NO DASHES 5910007669165
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| MATT | MATERIAL | CASE PLASTIC |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| AAQL | BODY STYLE | |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.150 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 100000.0 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES MINIMUM 0.385 AND INCHES MAXIMUM 0.415 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHMS 10000.0 |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 1.000 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 2.5000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.250 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 98453-301986 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 50.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -5.00 TO 5.00 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.300 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.500 |
| CQFB | VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE | WITHOUT VOLTAGE APPLIED SINGLE SECTION -25.0 TO 15.0 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
Supersedes
This item replaces cancelled NIINs 000890678 · 004017405 · 004152068 · 004663316 · 010280769 · 010494061 · 011209063. An older drawing citing one of those numbers resolves here.