NSN 5905-00-868-3723 · NIIN 008683723 · FSC 5905
NO DASHES 5905008683723
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 340.0 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.750 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.625 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.05700 AND INCHES MAXIMUM 0.06700 |
| AEDX | SHAFT STYLE | |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.05700 |
| BYDT | BEARING TYPE | SHAFT BALL |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.750 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 0.74500 AND INCHES MAXIMUM 0.75000 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -400.0 TO 400.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 8 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.072 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.30 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.281 |
| CQPH | DEVICE DESIGN TYPE | AT 6:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.62000 AND INCHES MAXIMUM 0.06300 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.40 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AEFY | SHAFT END PLAY | INCHES 0.003 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.05700 AND INCHES MAXIMUM 0.06700 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.375 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 175.0 AND KILOHMS 2ND SECTION 200.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AXGY | MOUNTING METHOD | SERVO MOUNT |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.615 |