NSN 4720-01-050-9164 · NIIN 010509164 · FSC 4720
NO DASHES 4720010509164
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.602 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 275.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MAXIMUM 1.112 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.000 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 90.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES MINIMUM WORKING 6.250 AND INCHES MAXIMUM WORKING 6.500 |
| FEAT | SPECIAL FEATURES | TWO 0.047 IN. DIA LOCKWIRE HOLES ON EACH NUT |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT (UNJ) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION CONTROL 81755--510 |