NSN 5305-01-693-7273 · NIIN 016937273 · FSC 5305
NO DASHES 5305016937273
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F16 AIRCRAFT
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST TREATMENT RESPONSE -IL-DTL-83488 TY II,CL 3 ION VAOR DEOSITED ALU-INU- COATING AND ASSN STD 2ND TREATMENT RESPONSE AS5272 OR -IL-L-46040 TY I DRY FIL- LUBRICANT ALIED OVER ALU-INU- COATING |
| AAJD | THREAD CLASS | 3A |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.4375 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 132000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.447 AND INCHES MAXIMUM 0.507 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.108 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2641 AND INCHES MAXIMUM 0.2651 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEG F FLUSH HEAD,OFFSET CRUCIFORM RECESS,ALLOY STEEL,132 KSI SHEAR |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.7925 AND INCHES MAXIMUM 0.8225 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM AND LUBRICANT |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.370 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AGAV | END ITEM IDENTIFICATION | F16 AIRCRAFT |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |