NSN 5950-01-297-8517 · NIIN 012978517 · FSC 5950
NO DASHES 5950012978517
In Stock
TRANSFORMER,PULSE
Coils and Transformers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ACYW | IMPEDANCE RATING IN OHMS | SINGLE COMPONENT ALL PRIMARY MINIMUM 3000.0 |
| ACZB | FREQUENCY RATING | SINGLE COMPONENT MEGAHERTZ NOMINAL 1.0 |
| ACZH | PRIMARY TO SECONDARY TURN RATIO | 1 TO 1-7/16 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.700 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 1.500 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.750 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AXGY | MOUNTING METHOD | SINGLE GROUP THREADED HOLE(S) |
| BPLC | WINDING FUNCTION AND QUANTITY | SINGLE COMPONENT PRIMARY 4 AND SECONDARY 4 |
| CBBL | FEATURES PROVIDED | W/RESISTOR |
| CQJX | NOMINAL THREAD SIZE | SINGLE GROUP INCHES 0.138 |
| CQKH | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE BASE OF AN ISOSCELES TRIANGLE | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES MINIMUM 0.890 AND INCHES MAXIMUM 0.910 |
| CSQJ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 81755-C8839 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE GROUP UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 12 |