NSN 6105-00-351-6867 · NIIN 003516867 · FSC 6105
NO DASHES 6105003516867
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXGY | MOUNTING METHOD | FLANGE |
| BFMF | COOLING METHOD | FAN COOLED |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AAJT | OVERALL HEIGHT | INCHES 2.500 |
| AAJU | OVERALL LENGTH | INCHES 1.734 |
| AAJV | OVERALL WIDTH | INCHES 2.125 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1250 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 6.0 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.375 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.250 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 1.875 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 450.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FEAT | SPECIAL FEATURES | 1 RPM GEARED OUTPUT SPEED,OUTPUT SHAFT OFFSET AND PARALLEL TO ARMATURE AXIS |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 2 |
| FAAZ | PHASE | INPUT SINGLE |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
Supersedes
This item replaces cancelled NIIN 006941646. An older drawing citing one of those numbers resolves here.