NSN 5910-01-099-6523 · NIIN 010996523 · FSC 5910
NO DASHES 5910010996523
In Stock
CAPACITOR,FIXED,CERAMIC DIELECTR
Capacitors
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.250 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.080 AND INCHES MAXIMUM 0.100 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.170 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.015 AND INCHES MAXIMUM 0.021 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHMS 10000.0 |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 1.800 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 200.0 |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -60.0 TO 60.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PICOFARADS SINGLE SECTION -0.25 TO 0.25 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 100000.0 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.150 |
| CWPN | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 1.000 |
| CWQF | QUALITY FACTOR AT REFERENCE TEMP | 1000.000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | CASE PLASTIC |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-20 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-20 TO 27E |
Supersedes
This item replaces cancelled NIIN 011132889. An older drawing citing one of those numbers resolves here.