NSN 5910-01-258-1883 · NIIN 012581883 · FSC 5910
NO DASHES 5910012581883
In Stock
CAPACITOR,FIXED,ELECTROLYTIC
Capacitors
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.411 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.437 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 3.312 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.093 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AECN | IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 323.0 |
| AECQ | ELECTRICAL POLARIZATION | POLARIZED |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 68.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -40.0 AND CELSIUS MAXIMUM 85.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 450.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 50.00 |
| CWNJ | CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 17.0000 |
| CWQH | DC LEAKAGE AT REFERENCE TEMP | MICROAMPERES 262.000 |
| CWSG | TERMINAL SURFACE TREATMENT | NICKEL |
| CWSZ | CASE INSULATION MATERIAL | PLASTIC |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-62 |
| TTQY | TERMINAL TYPE AND QUANTITY | STANDARD TUBE BASE 4 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-62 TO 8 |
Supersedes
This item replaces cancelled NIIN 009262330. An older drawing citing one of those numbers resolves here.