NSN 5990-00-421-0950 · NIIN 004210950 · FSC 5990
NO DASHES 5990004210950
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 64.00 |
| AJSL | BODY SIZE | 8 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3660 AND INCHES MAXIMUM 0.3800 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0380 AND INCHES MAXIMUM 0.0430 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 81.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 365.00 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1770.00 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 350.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 73.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 470.00 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 2.203 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7470 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.6060 AND INCHES MAXIMUM 1.6200 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 330.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AAQL | BODY STYLE | |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| CQTM | TERMINAL LOCATION | REAR |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |