NSN 5990-00-234-9136 · NIIN 002349136 · FSC 5990
NO DASHES 5990002349136
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.6060 AND INCHES MAXIMUM 1.6300 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3660 AND INCHES MAXIMUM 0.3900 |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 36.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 0.133 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 1480.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 80.90 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 930.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 79.40 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 317.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | NOMINAL 31.40 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 208.00 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | NOMINAL 30.30 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.500 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.8 TO 12.8 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0380 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0350 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0300 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.138 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |