NSN 5990-00-455-4864 · NIIN 004554864 · FSC 5990
NO DASHES 5990004554864
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
54 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 32.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.75 TO 12.75 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0005 AND INCHES MAXIMUM 0.0015 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0380 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AJSL | BODY SIZE | 8 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6250 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.2800 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7450 AND INCHES MAXIMUM 0.7550 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 0.012 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.02 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| AJTC | ZSS RESISTANCE IN OHMS | MINIMUM 153.00 AND MAXIMUM 207.00 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 1420.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 81.64 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 931.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 80.50 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | MINIMUM 140.00 AND MAXIMUM 190.00 |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 119.00 AND MAXIMUM 163.00 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 317.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | NOMINAL 31.40 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 133.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 178.00 AND MAXIMUM 242.00 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 132.00 AND MAXIMUM 178.00 |
| AJTA | ZRS RESISTANCE IN OHMS | MINIMUM 229.00 AND MAXIMUM 311.00 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1540.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0350 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 18.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0300 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 9.00 AND MAXIMUM 121.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | MINIMUM 89.00 AND MAXIMUM 121.00 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 1.104 AND ROTOR TO STATOR MAXIMUM 1.172 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 208.00 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | NOMINAL 30.30 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.500 |