NSN 5910-00-107-7775 · NIIN 001077775 · FSC 5910
NO DASHES 5910001077775
In Stock
CAPACITOR,FIXED,MICA DIELECTRIC
Capacitors
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.190 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 7500.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 5000.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -5.00 TO 5.00 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| AEBM | MAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS | 0.33 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED MOUNTING HOLES 2 |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHMS 2000.0 |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 200.000 |
| AEBK | MAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS | 3.6 |
| AEBL | HIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ | 3000.0 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-5 TO 12A |
| MATT | MATERIAL | CASE PLASTIC |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-5 |
| AAQL | BODY STYLE | |
| ADAU | BODY HEIGHT | INCHES NOMINAL 1.719 |
| AEBN | LOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ | 100.0 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 1.625 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 2.281 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.180 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 2.625 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 2 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.469 |
| ADAT | BODY WIDTH | INCHES NOMINAL 1.266 |