NSN 5910-00-187-0013 · NIIN 001870013 · FSC 5910
NO DASHES 5910001870013
In Stock
CAPACITOR,FIXED,MICA DIELECTRIC
Capacitors
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.520 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.220 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 0.350 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.032 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHMS 5000.0 |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 1200.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 150.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-39001 TO 5 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 100000.0 |
| MATT | MATERIAL | CASE PLASTIC |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-39001 |
| CRDN | TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 TO 70.0 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.0000 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.000 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.570 AND INCHES MAXIMUM 0.660 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 500.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -2.00 TO 2.00 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0014 |