NSN 5990-00-992-7968 · NIIN 009927968 · FSC 5990
NO DASHES 5990009927968
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0900 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 8.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 70.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 350.0 |
| AJSL | BODY SIZE | 11 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0650 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 77.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 20.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 15.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 24.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9620 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0500 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.485 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 8.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES MAXIMUM 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.8060 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3200 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.2120 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 500.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 75.00 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 128.00 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8150 |