NSN 5985-00-138-3296 · NIIN 001383296 · FSC 5985
NO DASHES 5985001383296
In Stock
SWITCH,RADIO FREQUENCY TRANSMISS
Antennas, Waveguides, and Related Equipment
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.425 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.500 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.500 |
| ACZB | FREQUENCY RATING | SINGLE FREQUENCY CROSSTALK REFERENCE GIGAHERTZ MINIMUM 0.0 AND GIGAHERTZ MAXIMUM 12.0 |
| ACZB | FREQUENCY RATING | SINGLE FREQUENCY INSERTION LOSS REFERENCE GIGAHERTZ MINIMUM 0.0 AND GIGAHERTZ MAXIMUM 12.0 |
| ACZB | FREQUENCY RATING | SINGLE FREQUENCY OPERATING GIGAHERTZ MINIMUM 0.0 AND GIGAHERTZ MAXIMUM 12.0 |
| ACZB | FREQUENCY RATING | SINGLE FREQUENCY VOLTAGE STANDING WAVE RATIO GIGAHERTZ MINIMUM 0.0 AND GIGAHERTZ MAXIMUM 12.0 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.094 |
| AEEA | SWITCH TYPE | NONTRANSFER |
| AEJN | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | SINGLE MOUNTING FACILITY PATTERN INCHES NOMINAL 1.310 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -54.0 TO 85.0 |
| AHTW | VOLTAGE STANDING WAVE RATIO | 1.50 |
| AHTX | INSERTION LOSS IN DECIBELS | 0.50 |
| AHUC | COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| AHUD | CONNECTOR END DESIGN | FEMALE |
| AKNV | MINIMUM CROSSTALK RATING IN DECIBELS | 60.0 |
| AKPC | ACTUATOR OPERATING METHOD | RELAY |
| AKPE | ACTUATOR CURRENT TYPE AND RATING IN AMPS | DC NOMINAL 0.2 |
| AKPJ | ACTUATOR VOLTAGE IN VOLTS | MINIMUM 24.0 AND MAXIMUM 30.0 |
| AKPN | SWITCH OPERATION SEQUENCE | BREAKS BEFORE MAKES |
| AKPP | SWITCHING TIME | MILLISECONDS 12.0 |
| AKPQ | SWITCH RETURN MECHANISM TYPE | FAIL-SAFE |
| AKPX | POLE QUANTITY | 1 |
| AKPY | THROW QUANTITY | 2 |
| AKRC | COUPLING POSITION QUANTITY | 3 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 2 |
| CQYJ | MOUNTING FACILITY PATTERN | SINGLE MOUNTING FACILITY PATTERN TWO POSITION IN-LINE |
| MATT | MATERIAL | BODY ALUMINUM |
| SFTT | SURFACE TREATMENT | BODY OUTSIDE SURFACES NICKEL |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 AND RECEPTACLE, COAXIAL 3 |