NSN 5910-00-728-8480 · NIIN 007288480 · FSC 5910
NO DASHES 5910007288480
In Stock
CAPACITOR,VARIABLE,AIR DIELECTRI
Capacitors
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.938 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.438 |
| AXGT | INSULATION DC RESISTANCE AT 25 DEG CELSIUS | GIGOHMS 100.0 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-92 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 1 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.112 |
| CTGR | ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | SHAFT 1 |
| CTGN | CAPACITANCE RANGE IN PICOFARADS | 5.0 TO 42.0 |
| CTGP | NONDERATED VOLTAGE RATING AND TYPE | SINGLE SECTION DC CONTINUOUS 600.0 |
| AXGJ | ADJUSTMENT DEVICE ROTATION | DEGREES NOMINAL CLOCKWISE 180.0 |
| AXGR | ADJUSTMENT DEVICE TORQUE | INCH-OUNCES MINIMUM 2.500 AND INCH-OUNCES MAXIMUM 10.000 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.656 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AKNA | INCLOSURE TYPE | UNINCLOSED |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.375 |
| AECJ | QUALITY FACTOR AT 25 DEG CELSIUS | 1500.0 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.219 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.813 |
| AXCN | SPLIT-STATOR ROTARY PLATE TYPE | DIFFERENTIAL |
| AXCM | TUNING CHARACTERISTIC | SINGLE SECTION STRAIGHT LINE CAPACITY |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
Supersedes
This item replaces cancelled NIIN 001261577. An older drawing citing one of those numbers resolves here.