NSN 4720-01-102-6545 · NIIN 011026545 · FSC 4720
NO DASHES 4720011026545
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.250 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.188 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.188 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.000 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 18.000 |
| ADJS | EXTERIOR COLOR | BLACK |
| AEPR | FLANGE OUTSIDE DIAMETER | FIRST END INCHES NOMINAL 2.000 |
| AEPR | FLANGE OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 2.000 |
| AHNC | CONNECTION STYLE | |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 75.000 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIFTH LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED TEXTILE YARN |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER BRAIDED WIRE |