NSN 3020-00-239-0653 · NIIN 002390653 · FSC 3020
NO DASHES 3020002390653
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 8.7438 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 10.0 AND ROCKWELL C MAXIMUM 20.0 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| ANTP | BORE STYLE | |
| AJLA | TEETH QUANTITY | 45 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 8.4938 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 5.186 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.621 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 2.922 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 6.750 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-890,CLASS AN |
| STYL | STYLE DESIGNATOR | |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 3.750 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.250 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 7.000 |
| FEAT | SPECIAL FEATURES | TWO PULLER HOLES 1/2-13 NC THD 7/8 IN. DEEP IN SECOND HUB END |
| MATT | MATERIAL | OVERALL STEEL |