NSN 4720-01-474-3486 · NIIN 014743486 · FSC 4720
NO DASHES 4720014743486
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 300.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.500 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.500 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL CORROSION RESISTING |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING PASSIVATE |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.5625 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 100.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 12.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 200.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 27.800 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; STAINLESS MATERIAL IS 316L; SPEC ALLOWS EITHER 316L; OR 321 SS |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAEJ514-81343 |