NSN 3130-01-694-4943 · NIIN 016944943 · FSC 3130
NO DASHES 3130016944943
In Stock
BEARING UNIT,PLAIN
Bearings, Mounted
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SPCL | SPECIAL TEST FEATURES | MATERIAL OF OUTER RACE (TWO PIECES): 4340 STEEL FORTING; HEAT TREATED TO 34-48 HARDNESS ROCKWELL COLLINS; EXPOSED SURFACES AND PARTING LINE: CADMIUM PLATING PER AMS-QQ-P-416, TYPE 1, CLASS 2; MAGNETIC PARTICLE INSPECT PER ASTM E1444 PRIOR TO PLATING; OUTER RACES FASTENED TOGETHER WITH 12 3/8-24 CAP SCREWS INSTALLED USING WET PRIMER TT-P-1757; BALL MATERIAL: 7075-T6 ALUMINUM; HARD ANODIZE SPHERICAL OUTSIDE DIAMETER AND SIDE FACES PER MIL-A-8625, TYPE III; CONTACT POINTS TO BE ON INTERNAL DIAMETER CHAMFER; CHEMICAL FILM TREAT BORE AND CHAMFERS PER MIL-DTL-5541, TYPE 1, CLASS 1A; PTFE LINER: RBC KAHR-LON X 1200S BONDED TO SPHERICAL INSIDE DIAMETER OF OUTER RACE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ALIGNING RING MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 TYE III |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | MARK HEI- ART NO D7-2371, BOEING CONTROL NO 27-10381-1 |
| MATT | MATERIAL | BALL ALUMINUM ALLOY 7075 |
| FEAT | SPECIAL FEATURES | TIGHTEN TORQUE 320-390 IN LB; CONFORM BOEING DWG27-10381 |
| SFTT | SURFACE TREATMENT | BALL ANODIZE |
| SFTT | SURFACE TREATMENT | OUTER RING CADMIUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPERICAL BEARING |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | ALIGNING RING CHROMATE ZINC AND ANODIZE |