NSN 4720-00-986-6932 · NIIN 009866932 · FSC 4720
NO DASHES 4720009866932
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 40.000 |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, FLAT STEEL COIL , INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; SUPPLIED WITH TWO PROTECTIVE CAP PLUGS |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.750 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.239 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 9.500 |
| ADJS | EXTERIOR COLOR | BLACK |
| AHNC | CONNECTION STYLE | |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2B |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY WRAPPED STEEL FABRIC |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING CADMIUM |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY WRAPPED STEEL FABRIC |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY WRAPPED STEEL FABRIC |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517,100R9,TYE A-81343 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY WRAPPED STEEL FABRIC |
Supersedes
This item replaces cancelled NIIN 009947266. An older drawing citing one of those numbers resolves here.