NSN 5315-01-393-6317 · NIIN 013936317 · FSC 5315
NO DASHES 5315013936317
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.405 |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.780 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES NOMINAL 0.438 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.025 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.140 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.140 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| CRDY | FIRST END LOCATION | SQUARE END |
| CSGL | SECOND END TIP RADIUS | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.090 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 46.2 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 1.120 |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303SE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST MATERIAL RESPONSE QQ-S-763 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-763,COND B OR MFR REF 3RD MATERIAL RESPONSE --S265,CAGEC 76301 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |