NSN 5133-01-464-6757 · NIIN 014646757 · FSC 5133
NO DASHES 5133014646757
In Stock
CUTTER,COUNTERSINK
Drill Bits, Counterbores, and Countersinks: Hand and Machine
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVA | POINT DIAMETER | INCHES NOMINAL 0.300 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 6.000 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.000 |
| AKZH | CUTTING END STYLE | |
| AKZX | HOLDER ACCOMMODATED | MICRO-STOP FIXTURE |
| ALAR | FLUTE QUANTITY | 2 |
| CTHT | INCLUDED ANGLE | DEGREES MINIMUM 119.7 AND DEGREES MAXIMUM 120.3 |
| FEAT | SPECIAL FEATURES | TILE CUTTER CONSISTS OF A 2 IN DIA, 2 FLUTE COUNTERSINK AND A MICRO-STOP FIXTURE. COUNTERSINK IS 3 IN LONG W/A DIA OF 2 IN;BODY 2 IN LG W/2 IN DIA,W/SLOT ON ONE END 0.3 IN W TO HOLD CUTTER;OTHER END 7/16-20 UNF-2A THREADS,WHICH SCREW INTO THE MICRO-STOP FIXTURE. CUTTER IS 1 IN LG W/DIA 2 IN; BASE 0.3 IN W.FIXTURE DIA 3 IN,CONSISTS OF BAREL SECTION AND FOOT. BARREL 3/8 IN DIA SHANK,INSERTS INTO CHUCK OF DRILL. THE OTHER END THREADS ONTO THE CUTTER.THE FOOT THREADS ONTO BARREL TO CONTROL DEPTH OF CUT W/RANGE OF APPROX 1 IN AND SHAFT A TRAVEL OF 0.5 IN. WT 2 LBS;USED TO REMOVE DAMAGED TILE MATERIAL FROM UPPER HOT TRAILING EDGE USING PNEUMANIC DRILL, N2149 |
| MATT | MATERIAL | CUTTER STEEL AND CARBIDE |
| SFTT | SURFACE TREATMENT | CUTTER OXIDE FILM |