NSN 2010-00-540-8598 · NIIN 005408598 · FSC 2010
NO DASHES 2010005408598
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CPNC | FORWARD END TAPER LENGTH | FEET NOMINAL 1.542 |
| CPTG | FORWARD BEARING SLEEVE LENGTH | FEET NOMINAL 2.479 |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| AEVE | KEYWAY QUANTITY | 1 AND 3 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 54.333 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 20.750 |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 3.500 AND INCHES MAXIMUM 3.562 |
| APZX | PROTECTIVE COVERING TYPE | RUBBER |
| CTMS | FORWARD END TAPER | PER FOOT IN INCHES NOMINAL 0.125 |
| MATT | MATERIAL | STEEL |
| ABRV | KEYWAY DEPTH | INCHES NOMINAL 1.312 |
| CPTS | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES AND SURFACE BETWEEN BEARING SLEEVE AND COUPLING COVERED |
| CPTT | FORWARD END TAPER MAJOR DIAMETER | INCHES NOMINAL 19.000 |
| BPJZ | USAGE LOCATION | PORT/STARBOARD |
| CPHM | FORWARD END DESIGN | TAPERED |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 22.500 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-890, CLASS AN |
| APQB | UNIT TYPE | STERN TUBE SHAFT SECTION |
| AHSU | COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 34.750 |
| CPNK | AFTER END COUPLING DESIGN | INTEGRAL |
| CPTB | COUPLING THICKNESS | INCHES NOMINAL 4.250 |
| CQCF | CONSTRUCTION | HOLLOW |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 7.000 AND INCHES MAXIMUM 14.250 |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 22.500 |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 6.000 |