NSN 3413-01-369-3043 · NIIN 013693043 · FSC 3413
NO DASHES 3413013693043
In Stock
DRILLING MACHINE,UPRIGHT
Drilling and Tapping Machines
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| AJGD | HEAD TYPE | FIXED |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | RAISING MECHANISM FOR HEAD OR TABLE 1,SELF-LOCKING DEPTH STOP 1,DEPTH GAGE 1,BELT GUARD 1,BELT AND MOTOR PULLEY (SPECIFY BORE) 1,SAFETY COLLAR FOR HEAD 1,MOTOR 1,CONTROLS 1 |
| AQDD | FEED TYPE | HAND |
| BCRH | SPINDLE QUANTITY | 1 |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRK | SPINDLE SOCKET TAPER SIZE | MORSE 3 |
| BNRL | SPINDLE TRAVEL DISTANCE | INCHES NOMINAL 6.000 |
| BNRW | BASE WORKING SURFACE LENGTH | INCHES NOMINAL 16.250 |
| BNRX | BASE WORKING SURFACE WIDTH | INCHES NOMINAL 13.500 |
| BNRZ | COLUMN TYPE | ROUND |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | INCHES NOMINAL 11.875 |
| BNSF | BASE WORKING SURFACE TYPE | TEE SLOTTED |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BNSH | BASE WORKING SURFACE AREA | SQUARE INCHES 219.000 |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED W/CENTER HOLE |
| BNSP | UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| BNSQ | UPPER WORKING SURFACE AREA | SQUARE INCHES 288.000 |
| BNSS | UPPER WORKING SURFACE LENGTH | INCHES NOMINAL 18.000 |
| BNST | UPPER WORKING SURFACE WIDTH | INCHES NOMINAL 16.000 |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | INCHES NOMINAL 34.250 |
| BQLR | SPINDLE TYPE | TAPERED SOCKET |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 125.0 TO 1400.0 |
| ELEC | VOLTAGE IN VOLTS | 230.0 OR 460.0 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | 24 VOLT PUSH BUTTON STATION,MAGNETIC STARTER,TRANSFORMER AND 3-LEG OVERLOAD PROTECTION (LVC),MEIGHT BALL BEARINGS REGIDLY SUPPORT SPINDLE ON SPEED REDUCTION MODELS. TEN-SPLINE SPINDLE IS 3/4 IN. IN DIAMETER FOR GREATER TORQUE TRANSMISSION. LARGE 2 3/8 IN. DIAMETER QUILL IS SUPPORTED BY THREE PRECISION BORED LANDS IN HEAD,PROVIDING EXTRA SMOOTH TRAVEL. LONG COLUMNS PROVIDE EXTRA BIG CAPACITY FOR LARGE WORK. |
| FREQ | FREQUENCY IN HERTZ | 60.0 |