NSN 6105-00-635-2180 · NIIN 006352180 · FSC 6105
NO DASHES 6105006352180
In Stock
MOTOR,CONTROL
Motors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGRB | FLAT DEPTH | SECOND END INCHES NOMINAL 0.1400 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 8 |
| ABXQ | FLATTED PORTION LENGTH | SECOND END INCHES NOMINAL 0.3120 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END SINGLE STYLE A5 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CQRR | TAPER | FIRST END PER FOOT IN INCHES 7.500 |
| AXGY | MOUNTING METHOD | PAD |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END FIRST STYLE A2 AND SECOND STYLE A4 |
| BFML | CONTROL FIELD WINDING TYPE | TWO WINDINGS, SERIES CONNECTED |
| ACDC | CURRENT TYPE | INPUT AC |
| AAJV | OVERALL WIDTH | INCHES 2.375 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 2.437 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 2.437 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.220 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 0.531 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 65.0 AND OPERATING CELSIUS -55.0 AND OPERATING CELSIUS 55.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 11400.0 |
| BKPB | CURRENT RATING METHOD | NO LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 3.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.112 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 0.375 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 115.0 |
| CBBL | FEATURES PROVIDED | SINGLE PHASE ADAPTABILITY AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| AASA | THREAD LENGTH | FIRST END INCHES NOMINAL 0.120 |
| ABND | TAPER LENGTH | FIRST END INCHES MINIMUM 0.179 AND INCHES MAXIMUM 0.189 |
| AAJU | OVERALL LENGTH | INCHES 4.031 |
| BFMJ | CONTROL FIELD CURRENT RATING IN AMPS | 0.335 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | MTG HOLES SPOTFACE 0.312IN. DIA IRREGULARLY SPACED ON 2.437 IN. BOLT CIRCLE |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 4 |
| AAJT | OVERALL HEIGHT | INCHES 2.813 |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 313.0 |
Supersedes
This item replaces cancelled NIIN 007656556. An older drawing citing one of those numbers resolves here.