NSN 3120-00-324-7344 · NIIN 003247344 · FSC 3120
NO DASHES 3120003247344
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | LEFT-HAND |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 62.0 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MINIMUM 0.8020 AND INCHES MAXIMUM 0.8220 |
| AAJD | THREAD CLASS | 3A |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.2495 AND INCHES MAXIMUM 0.2500 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 35.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 42.0 |
| FEAT | SPECIAL FEATURES | KEYWAY IN SHANK FOR STD NAS 513 LOCKWASHER |
| AGGY | SHANK THREAD LENGTH | INCHES MINIMUM 0.9690 AND INCHES MAXIMUM 1.0620 |
| AGKP | STATIC RADIAL LOAD RATING | POUNDS 4067 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INTERNAL ROD END BODY ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MATT | MATERIAL | INNER MEMBER STEEL COMP 440C |
| MATT | MATERIAL | INTERNAL ROD END BODY STEEL COMP 630 |
| MATT | MATERIAL | RACE INSERT STEEL COMP 630 |
| MATT | MATERIAL | RACE LINER PLASTIC POLYTETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER ASSN STD SINGLE MATERIAL RESPONSE AISI |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| SFTT | SURFACE TREATMENT | INNER MEMBER CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER MEMBER FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-I-6866 |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.1090 AND INCHES MAXIMUM 2.1390 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES MINIMUM 1.7080 AND INCHES MAXIMUM 1.7280 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.2450 AND INCHES MAXIMUM 0.2550 |