NSN 3020-00-266-7737 · NIIN 002667737 · FSC 3020
NO DASHES 3020002667737
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 7.5541 |
| AJLA | TEETH QUANTITY | 44 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.625 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.125 |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.625 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.250 |
| CWSN | KEYWAY NOMINAL WIDTH | SECOND END INCHES 0.5000 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | SECOND END INCHES 1.5000 |
| CWSW | TAPER MAJOR NOMINAL DIAMETER | SECOND END INCHES 2.4990 |
| CWNH | TOOTH FORM | STANDARD |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 7.6705 |
Supersedes
This item replaces cancelled NIIN 004993483. An older drawing citing one of those numbers resolves here.