NSN 5990-00-945-3518 · NIIN 009453518 · FSC 5990
NO DASHES 5990009453518
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSL | BODY SIZE | 10 |
| AAQL | BODY STYLE | |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 34.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 40.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 32.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 25.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.5 TO 7.5 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 16.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2810 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 119.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 124.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 12.70 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0500 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.8260 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0630 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 6 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 80.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 190.0 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.8400 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 29.00 |