NSN 4730-00-595-3739 · NIIN 005953739 · FSC 4730
NO DASHES 4730005953739
In Stock
BOLT,FLUID PASSAGE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.235 |
| BBKP | FOURTH DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.499 |
| BBKQ | FIFTH DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.363 |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | INCHES NOMINAL 0.052 |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | INCHES NOMINAL 0.354 |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | INCHES NOMINAL 0.666 |
| BBKW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | INCHES NOMINAL 1.027 |
| BBKX | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIFTH DIAMETER | INCHES NOMINAL 1.199 |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | INCHES NOMINAL 0.189 |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | INCHES NOMINAL 0.898 |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | INCHES NOMINAL 1.438 |
| BBLF | WRENCHING FEATURE HEIGHT | INCHES NOMINAL 0.344 |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACKN | FIRST END STYLE DESIGNATOR | |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACLS | SECOND END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACLT | SECOND END STYLE DESIGNATOR | |
| ACMR | SECOND END THREAD CLASS | 3A |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 20 |
| AAXC | CONCENTRIC HOLE DIAMETER | INCHES NOMINAL 0.187 |
| CRPF | SECOND END THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | ALUMINUM |
| SFTT | SURFACE TREATMENT | ANODIZE |
| CRMX | SECOND END THREAD QUANTITY PER INCH | 20 |
| CRNB | SECOND END NOMINAL THREAD SIZE | INCHES 0.437 |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.499 |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.433 |
| AAQL | BODY STYLE | |
| AAWX | CONCENTRIC HOLE DEPTH | INCHES NOMINAL 0.684 |
| CQYM | FIRST END NOMINAL THREAD SIZE | INCHES 0.437 |
| CRCN | SECOND END SEAT ANGLE | DEGREES NOMINAL 12.0 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.684 AND INCHES MAXIMUM 0.691 |
| ATKZ | FIRST END THREAD LENGTH | INCHES NOMINAL 0.239 |
| ATLF | SECOND END THREAD LENGTH | INCHES NOMINAL 0.378 |
| BBDF | WRENCHING FEATURE STYLE | |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | INCHES NOMINAL 0.425 |