NSN 5990-00-784-5557 · NIIN 007845557 · FSC 5990
NO DASHES 5990007845557
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 8 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2810 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8370 AND INCHES MAXIMUM 0.8400 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.800 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2500 |
| AJSL | BODY SIZE | 10 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 2.0 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 2.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 10000.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 1.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0500 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0460 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0460 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0630 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.5310 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |