NSN 5306-00-486-1543 · NIIN 004861543 · FSC 5306
NO DASHES 5306004861543
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.185 AND INCHES MAXIMUM 1.195 |
| BQDM | HOLE TYPE | DRILLED |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| ASXK | HOLE QUANTITY | 4 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.055 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.803 AND INCHES MAXIMUM 0.814 |
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.125 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6485 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-8837 TYE 1 CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 56878-EWB26 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 260000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 51.0 AND ROCKWELL C MAXIMUM 54.0 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.6230 AND INCHES MAXIMUM 0.6240 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.127 AND INCHES MAXIMUM 1.177 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.887 AND INCHES MAXIMUM 1.917 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.673 |
| CMLP | THREAD QUANTITY PER INCH | 18 |