NSN 5306-00-150-3595 · NIIN 001503595 · FSC 5306
NO DASHES 5306001503595
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.349 AND INCHES MAXIMUM 1.416 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.609 AND INCHES MAXIMUM 3.656 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.680 AND INCHES MAXIMUM 0.700 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.801 AND INCHES MAXIMUM 1.814 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.035 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 1.2475 AND INCHES MAXIMUM 1.2490 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.136 AND INCHES MAXIMUM 0.146 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 1.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.240 AND INCHES MAXIMUM 2.260 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.439 AND INCHES MAXIMUM 3.471 |
| MATT | MATERIAL | OVERALL STEEL OR STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF 1ST MATERIAL RESPONSE SS---107 FSC- 56878 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416,TY2,CL3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 26512-GB511B20D36 |