NSN 5306-01-054-2505 · NIIN 010542505 · FSC 5306
NO DASHES 5306010542505
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.333 AND INCHES MAXIMUM 0.400 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.343 AND INCHES MAXIMUM 1.390 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.177 AND INCHES MAXIMUM 0.197 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3108 AND INCHES MAXIMUM 0.3117 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 260000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 51.0 AND ROCKWELL C MAXIMUM 54.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 26512-GB511C |
Supersedes
This item replaces cancelled NIIN 010435712. An older drawing citing one of those numbers resolves here.