NSN 3416-00-150-7111 · NIIN 001507111 · FSC 3416
NO DASHES 3416001507111
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 36.000 |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 3 JAW UNIVERSAL CHUCK 6 IN.; 2 CENTERS,SOLID,60 DEGREES,NO. 2 MORSE TAPER; 1 SPINDLE SLEEVE BUSHING,NO. 2 MORSE TAPER; 1 CHUCK,DRILL,NO. 2 MORSE TAPER; 1 STEADY REST; 1 TOOL POST |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 50.0 TO 1350.0 |
| BTTD | RATED SWING | INCHES MINIMUM 10.000 AND INCHES MAXIMUM 11.000 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 10.125 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 6.250 |
| BTWB | THREAD CHANGE QUANTITY | 60 |
| BTWL | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.375 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 60 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 4.0 TO 240.0 |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| FAAZ | PHASE | THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | APGF,BTWB,BTZR,BTSZ,AWLX,ASHK,ACDC,ELEC,FREQ,FAAZ,AAXX |