NSN 3020-00-294-9548 · NIIN 002949548 · FSC 3020
NO DASHES 3020002949548
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.159 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.100 |
| ANTP | BORE STYLE | |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 2.145 |
| CWNM | TOOTH DIRECTION | RIGHT |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.0160 |
| AJLA | TEETH QUANTITY | 48 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.947 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.290 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 37.1733 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.000 |
| MATT | MATERIAL | OVERALL IRON |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.216 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.170 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.070 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.862 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.140 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.5954 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
Supersedes
This item replaces cancelled NIINs 003474131 · 003646815 · 003838690. An older drawing citing one of those numbers resolves here.