NSN 3010-01-086-5921 · NIIN 010865921 · FSC 3010
NO DASHES 3010010865921
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 4.000 |
| AAJU | OVERALL LENGTH | INCHES 6.871 |
| AAJV | OVERALL WIDTH | INCHES 3.429 |
| AAUH | SPLINE MINOR DIAMETER | SINGLE END INCHES NOMINAL 0.5300 |
| ABSA | SPLINE QUANTITY | 72 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.3120 |
| ACDC | CURRENT TYPE | INPUT DC |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 0.4370 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SLOT 1 AND THREADED STUD(S) 1 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END ANGLED TO ARMATURE/ROTOR AXIS |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.545 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 2.537 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 6.250 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.104 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 24.0 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 1 |