NSN 3120-01-025-5817 · NIIN 010255817 · FSC 3120
NO DASHES 3120010255817
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.4850 AND INCHES MAXIMUM 0.5000 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.9388 AND INCHES MAXIMUM 0.9393 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.7505 AND INCHES MAXIMUM 0.7515 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 1.4800 AND INCHES MAXIMUM 1.5000 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0575 AND INCHES MAXIMUM 0.0625 |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| FEAT | SPECIAL FEATURES | PLASTIC,POLYTETRAFLUOROETHYLENE LINER BONDED TO LEFT END SURFACE OF FLANGE |
| MATT | MATERIAL | OUTER LAYER STEEL COMP 630 |
| MATT | MATERIAL | INNER LAYER PLASTIC POLYTETRAFLUOROETHYLENE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 003231801. An older drawing citing one of those numbers resolves here.