NSN 3413-00-243-1441 · NIIN 002431441 · FSC 3413
NO DASHES 3413002431441
In Stock
DRILLING MACHINE,RADIAL
Drilling and Tapping Machines
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ABYE | ELECTRIC MOTOR POWER RATING | HORSEPOWER 5.0 |
| ACDC | CURRENT TYPE | AC |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | DRILLS,JOBBERS STRAIGHT SHANK HIGH SPEED 1/8 IN. TO 1/2 IN. BY 64THS,2 SETS; DRILLS ASA TAPER SHANK HIGH SPEED 1/2 IN. TO 1 IN. BY 16THS,2 SETS; DRILLS ASA TAPER SHANK,HIGH SPEED 1 IN. TO 1-1/2 IN. BY 8THS,2 SETS; SLEEVE REDUCING ASA NO. 4 TAPER TO NO. 3 TAPER,1; SLEEVE REDUCING ASA NO. 4 TAPER TO NO. 2 TAPER,1; SLEEVE REDUCING ASA NO. 4 TAPER TO NO. 1 TAPER,1; TABLE,PLAIN BOX TYPE 1 |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRH | ARM SIZE | FEET 4.000 |
| BNRJ | COLUMN DIAMETER | INCHES NOMINAL 9.000 |
| BNRK | SPINDLE SOCKET TAPER SIZE | MORSE 4 |
| BNRL | SPINDLE TRAVEL DISTANCE | INCHES MINIMUM 10.000 |
| BNRM | MAXIMUM DISTANCE FROM SPINDLE CENTER TO COLUMN | INCHES 48.000 |
| BNRN | MINIMUM DISTANCE FROM SPINDLE CENTER TO COLUMN | INCHES 13.000 |
| BNRP | MAXIMUM DISTANCE FROM SPINDLE NOSE TO BASE | INCHES 50.000 |
| BNRQ | MINIMUM DISTANCE FROM SPINDLE NOSE TO BASE | INCHES 16.000 |
| BNRT | HEAD TRAVEL DISTANCE ON ARM | INCHES NOMINAL 37.000 |
| BNRW | BASE WORKING SURFACE LENGTH | INCHES NOMINAL 53.000 |
| BNRX | BASE WORKING SURFACE WIDTH | INCHES NOMINAL 30.000 |
| BTSZ | SPINDLE SPEED QUANTITY | 9 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 90.0 TO 1500.0 |
| ELEC | VOLTAGE IN VOLTS | 208.0 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | FUNGUS RESISTANCE; RADIO INTERFERENCE SUPPRESSION ACROSS THE LINE MAGNETIC STARTER |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | SIZE A6 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AKYD AND FEAT |