NSN 5920-00-926-7402 · NIIN 009267402 · FSC 5920
NO DASHES 5920009267402
In Stock
FUSEHOLDER,BLOCK
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE MATERIAL RESPONSE QQ-C-530 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-C-533 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.138 |
| MATT | MATERIAL | CONTACT COPPER ALLOY 172 OR COPPER ALLOY 173 OR COPPER ALLOY 170 OR COPPER ALLOY 172 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 2.980 AND INCHES MAXIMUM 3.020 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 10 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.680 AND INCHES MAXIMUM 0.720 |
| MATT | MATERIAL | BODY PLASTIC DIALLYL PHTHALATE AND SILICA AND PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS AND PLASTIC POLYCAPROLACTAM AND PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND PLASTIC MELAMINE AND PLASTIC SILICONE AND GLASS FIBER |
| MATT | MATERIAL | TERMINAL COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE -DG AND MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG AND MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE --E AND MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE -SG |
| BRFC | COATING METHOD | CONTACT PLATED |
| ABTJ | MOUNTING HOLE QUANTITY | 5 |
| ACYB | BASE THICKNESS | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| SFTT | SURFACE TREATMENT | CONTACT COPPER AND TIN AND ZINC |
| SFTT | SURFACE TREATMENT | TERMINAL SOLDER DIP AND TIN |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-21346 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.360 AND INCHES MAXIMUM 1.400 |
| AEVB | MOUNTING HOLE STYLE | |
| AGUE | FUSE ACCOMMODATION QUANTITY | 5 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES MINIMUM 0.969 AND INCHES MAXIMUM 1.031 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES MINIMUM 0.246 AND INCHES MAXIMUM 0.254 |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 2.950 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-21346 TO 3 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 2.0 |
| CSDX | INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | POLE, MAINLINE, FUSED 5 |
| ELEC | VOLTAGE IN VOLTS | 250.0 |