NSN 5920-00-964-4384 · NIIN 009644384 · FSC 5920
NO DASHES 5920009644384
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTJ | MOUNTING HOLE QUANTITY | 1 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACT SURFACES |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 17 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL--14, TYE -AI-60 |
| ADEE | PANEL THICKNESS | INCHES MAXIMUM 0.125 |
| ADZC | ENVIRONMENTAL PROTECTION | HIGHEST AC VOLTAGE RATING AT SEA LEVEL SEALED |
| ADZC | ENVIRONMENTAL PROTECTION | LOCATION NOT OTHERWISE SPECIFIED WATERTIGHT |
| AEVB | MOUNTING HOLE STYLE | |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 250.0 |
| MATT | MATERIAL | BODY PLASTIC POLYESTER AND GLASS |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.350 AND INCHES MAXIMUM 2.390 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.240 |
| ABKH | BUSHING DIAMETER | INCHES NOMINAL 0.625 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES MINIMUM 0.540 AND INCHES MAXIMUM 0.580 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.138 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| AGUU | BUSHING THREAD LENGTH | INCHES MAXIMUM 0.175 |
| AGUV | CAP DIAMETER | INCHES MINIMUM 0.600 AND INCHES MAXIMUM 0.640 |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.635 |
| AGVH | FLATTED SIDE BUSHING HOLE LENGTH | INCHES MINIMUM 0.590 AND INCHES MAXIMUM 0.595 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 1 AND SCREW 1 |
Supersedes
This item replaces cancelled NIINs 001723149 · 004434080 · 007276899 · 008275754 · 008527300. An older drawing citing one of those numbers resolves here.