NSN 5920-00-878-0790 · NIIN 008780790 · FSC 5920
NO DASHES 5920008780790
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.164 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AEVB | MOUNTING HOLE STYLE | |
| AFXH | INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 0.933 AND INCHES MAXIMUM 0.943 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 4 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 18 |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.869 AND INCHES MAXIMUM 0.879 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.750 AND INCHES MAXIMUM 4.000 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.812 AND INCHES MAXIMUM 1.817 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.180 AND INCHES MAXIMUM 1.185 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.151 AND INCHES MAXIMUM 0.161 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 60.0 |
| AGUE | FUSE ACCOMMODATION QUANTITY | 2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG |
| AGUN | RESISTOR RATING | KILOHMS 1.2 |
| AGUP | INDICATING LAMP VOLTAGE RANGE IN VOLTS | 46.0 TO 60.0 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES MINIMUM 0.798 AND INCHES MAXIMUM 0.828 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| MATT | MATERIAL | BODY PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS AND PLASTIC POLYCAPROLACTAM AND GLASS AND PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS |
| AGVK | CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | INCHES MINIMUM 0.795 AND INCHES MAXIMUM 0.805 |
| AGVM | CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | INCHES MINIMUM 0.464 AND INCHES MAXIMUM 0.474 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
Supersedes
This item replaces cancelled NIIN 001672448. An older drawing citing one of those numbers resolves here.